Gerda Kievit

Gerda Kievit

Gerda Kievit
Meer ideeën van Gerda
The PLY90 is a patent pending connector that is a faster, better looking alternative to drilling and screwing projects together. Save time and energy by not having to align every board and precisely drill and screw all the pieces together. You can focus on the design of your creation using a standard construction method. Easily disassemble creations for storage or moving, recycle old projects into new ones.

The PLY90 is a patent pending connector that is a faster, better looking alternative to drilling and screwing projects together. Save time and energy by not having to align every board and precisely drill and screw all the pieces together. You can focus on the design of your creation using a standard construction method. Easily disassemble creations for storage or moving, recycle old projects into new ones.

Little Green Notebook:  corners with no bunching when recovering chairs and benches.  I wish I read this before I recovered the dining room chairs!

Little Green Notebook: corners with no bunching when recovering chairs and benches. I wish I read this before I recovered the dining room chairs!

Vacuum Glue into a Crack - Woodworking Shop - American Woodworker

Vacuum Glue into a Crack - Woodworking Shop - American Woodworker

corner jig

corner jig

Joint Connector, Small, 2-1/2" to 3-1/4" by WoodRiver. $2.25. These concealed fittings allow work surfaces to be connected rapidly and securely. They are great for joining countertop sections together. The semi-circular fastening elements are pressed against the recess walls as tension is applied. Fits in a 35mm (1-3/8") flat bottomed hole drilled 3/4" deep. Use a router with a 1/2" straight bit to connect holes. Hole spacing on the small connector is 2-1/2" to 3-1/4".

Joint Connector, Small, 2-1/2" to 3-1/4" by WoodRiver. $2.25. These concealed fittings allow work surfaces to be connected rapidly and securely. They are great for joining countertop sections together. The semi-circular fastening elements are pressed against the recess walls as tension is applied. Fits in a 35mm (1-3/8") flat bottomed hole drilled 3/4" deep. Use a router with a 1/2" straight bit to connect holes. Hole spacing on the small connector is 2-1/2" to 3-1/4".

How to make t-shirt yarn & joining the ends of t-shirt strips + 4 t-shirt yarn projects

How to make t-shirt yarn & joining the ends of t-shirt strips + 4 t-shirt yarn projects

plant box and belt -- great #DIY inspiration

plant box and belt -- great #DIY inspiration

DIY Photo Holder by most lovely things, via Flickr

DIY Photo Holder by most lovely things, via Flickr

...

...

wood block photo display

wood block photo display